2500KV Motor 600TVL Camera FPV Racing Drone

Description

Item Type: Racing Drone Frame

• Wheelbase: 140 mm / 5.51 inch
• Floor thickness: 3 mm / 0.12 inch
• Upper plate thickness: 1.5 mm / 0.06 inch
• Side panel thickness: 1 mm / 0.04 inch

Item Type: Motor

• KV: 2500kv
• Voltage: 2-6s
• Output shaft length: 14 mm / 0.55 inch
  Maximum pulling force: single 740g (6S/3056 three-leaf paddle)
• Maximum power: 480w
• Number of slots: 9n12p
• Mounting hole spacing: 12 mm / 0.47 inch
• Mounting hole specification: m2
• Recommended paddle: 3 inches

Item Type: F4 Flight Controller

• Main control chip: stm32f411
• IMU: mpu6000 6-axis sensor
• BEC: 5v/1a
• PPM/DSM/IBUS/UAR sharing: UART1-RX
• Support firmware: Betaflight/Cleanflight/Inav

Item Type: 20A Brushless ESC

• Continuous current: 20A
• Peak current: 25A (10s)
• Bec output: NO
• Input voltage: 2 ~ 6 s
• Main control chip: 48mhz efm8bb2
• Firmware upgrade: support dshot600 /blheli _ S/Oneshot125
• MOS: 3*3
• MOS model: pe632ba 30v53a

Item Type: VTX

• Transmitting power: 25/100/200/300mw adjustable in three steps
• Frequency points: 40ch
• Video format: full NTSC / PAL format
• Input voltage: 7V ~ 26V
• Power consumption: +12V/600MW, 260mah

Item Type: FOXEER Arrow MICRO PRO Camera

• Image sensor: 1/3″ Sony Super Had II CCD + NextChip 2040 DSP
• Pixel: PAL: 976 (H) x 494 (V); NTSC: 768 (H) × 494 (V)
• TV system: PAL
• Resolution: 600TVL (color) 650TVL (black and white)
• Synchronization: internal
• Minimum illumination: 0.01lux
• WDR: Support
• OSD programming board: support
• White point repair: support
• DNR: 2D DNR
• Camera title: support
• Image adjustment: support
• OSD: Edit Name, Power, Flight Time
• Input power: 5-40V
• Storage temperature: -40 C~60 C
• Working temperature: -10C~50C
• Power consumption: 70ma
• Recommended voltage: 3-6S
• Recommended battery capacity: 450-750 mAh

Package Includes:

• 1 x X140HV Frame Kit
• 1 x Atmosphere light strip
• 4 x 1507/2500KV Brushless Motors
• 1 x 4 In 1 20A Brushless ESC
• 1 x Betaflight F4 Flight Controller
• 1 x FOXEER Arrow MICRO PRO Camera
• 1 x XF5805 /5.8G 40CH 25/100/200/300mw Switchable VTX
• 1 x Multi functional taillight module
• 8 x T3056c Propellers (transparent purple * 2 Pairs / transparent * 2 Pairs)
• 1 x Battery board set ( 2mm battery protection plate*1 , EVA plate*2 , Anti-slip plate*1 )
• 4 x M5 screws nuts (black color*2 ,  sliver color*2)
• 1 x Screw set
• 10 x 2.5x100mm Nylon cable ties
• 2 x Wrenches